The Process Of Installing The AC.
The air conditioner is the equipment that is used mostly for the purpose of removing the moisture and heat from the insider of the occupied spaces for the reasons such as those of improving the comfort of the occupants. In most of the living places, the need of having the air conditioners has continued to grow. Such reasons have then made it necessary for the most of the new buildings to be fitted with the air conditioning systems. Also, most of the organizations are also ensuring that the working places are fitted with such systems in the working areas so as to improve the working conditions. This also is applicable to most of the homes and in the same measure. The process of purchasing an air conditioning system is not much challenging. However, the hassles arise when one is need to install such as system. This article expound more on the process which may be followed during the installation of a new air conditioning system.
The first step is the start with the installation of the indoor unit. In this case minimal obstruction to the wall has to be considered. On the other hand, the wall to be considered should be secure and that there should be no direct sunlight. The mounting plate of the Air Conditioning system is the next thing to consider. In this case, the location which was considered to be having the minimal obstruction is where the mounting plate should be fixed. After mounting, a hole should be created which will allow the piping of the system. The checking of the electrical systems for the indoor air conditioning system unit is what then follows. The electrical systems that are to be done in this case are the ones which will correspond to the descriptions as provided to the AC system manua. The step which involves the connection of the pipes through the drilled holes on the wall then follows. So as the air conditioning pipes may work more efficiently, one should then ensure that there will be less or no bending occurs when installing. The final step of the interior set of the AC system ends with the mounting of the AC unit of the wall. Of course, this is done on the mounting plate fixed on the wall.
The second part involves installing the outdoor unit. The first step of this part also involves the selection of the be place to mount the unit. In this case a place which has no dust, not cold or with minimal traffic should be selected. The laying of the concrete where the AC unit will placed will then follow with the connections for the unit too.